How to Make Mobile Remote Controlled Car | application Apk

How to Make Mobile Remote Controlled Car | application Apk

DC for motors and best car simple car and how to make a home simple car simple hacking this car

4 DC 12V 300RPM Metal Geared Motor

Mobile Remote Controlled Car

Remote Control CAR APK Bluetooth RC Cars 2019


  • Weight: 125 gm(Approx.)
  • RPM: 300
  • Operating Voltage: 12V DC
  • Gearbox: Attached Metal Gearbox
  • Shaft diameter: 6 mm
  • Shaft Length: 21 mm
  • Torque: As per RPM
  • No-load current = 60 MA(Max)
  • Load current = 300 MA(Max).
  • Dimensions: Body Diameter:
  • Mobile Remote Controlled Car
    38mm; Motor Length with shaft: 77 mm;
    Same size motor available in various RPMs.                                                                                          


    Robot Wheel 7 X 2 CM for Motor

    Wheel for robot which is easily comp-table for DC Gear motor. These wheels have a 6 mm hole for shaft with screw for fitting making it very easy to mount on motors. FEATURES 68 mm Diameter 2 cm Width Hole Diameter 6 mm Screw for fastening on motor shaft Made from virgin plastic.

  • Package  Content
  • 1 x Robot Wheel

    Romeo BLE – Arduino Robot Control Board with Bluetooth 4.0


It benefits from the Arduino open source platform, it is supported by thousands of open source codes, and can easily be expanded with your Arduino shields. The integrated 2 way DC motor driver and wireless socket allows you to start your own robot project immediately without the need for an additional motor driver.

Hundreds of sensors are now plug-play with Romeo. The Romeo BLE is a new member of Romeo Family. This robot controller inherits all functions of Romeo all-in-one controller, the Romeo BLE has integrated bluetooth 4.0, it is the first time to give a robot control board the power of easy set up. Thanks to the bluetooth 4.0, the Romeo BLE supports uploading sketch wireless which means you do not need to plug a cable to upload new code.

With Romeo BLE, all DFRobot’s mobile platforms and robots can now be played with iOS devices by APP “GoBle”.

What others say about this Romeo BLE?

“I have the Romeo BLE and consider it to be a huge step up from the standard Arduino boards I have. All those extra headers for the standard connections and the motor hookups make it a dream to work with.” From Drew.


  • Microcontroller: ATmega328P
  • Bootloader: Arduino UNO
  • On-board BLE chip: TI CC2540
  • Transmission range: 70m in free space
  • 14 Digital I/O ports
  • 6 PWM Outputs (Pin11, Pin10, Pin9, Pin6, Pin5, Pin3)
  • 8 10-bit analog input ports
  • 3 I2Cs
  • Two way H-bridged Motor Driver with 2A maximum current
  • 5 Buttons
  • Support Male and Female Pin Header
  • Integrated sockets for APC220 RF Module
  • Power Supply Port: USB or DC2.1
  • External Power Supply Range: 5-23V
  • DC output: 5V/3.3V
  • Auto sensing/switching external power input
  • Size: 94mm x 80mm(3.70″x3.15″)

Romeo BIL ( Amazon )

Romeo BLE – Arduino Robot Control Board with Bluetooth 4.0

$39.50 In Stock

Price in Reward Points:4000 Categories:

All Products Motors & Actuators & Drivers Arduino Micro-controllers DC Motor Drivers Romeo

Arduino Code & libraries: link



Leave a Reply

Your email address will not be published. Required fields are marked *